Carte de batterie de résérve 24 Vdc/-24 Vdc

The plug-in power supply card 751324 is powered from a +24 Vdc source and provides -24 Vdc power to the 5-card Shelf or the 8-card Shelf. Since Teleline equipment cannot operate from +24 V, it requires -24 V referenced to ground.

Product Number CLEI Code Description Download Documents
751324 NPPSFGBBAA Plug-in Power Supply Card +24 Vdc to -24 Vdc Specif ications Installation Guide

Carte de batterie de secours 24 Vdc/-24 Vdc

Two Plug-in Power Supply Cards may be installed in the 5-or 8-card Teleline shelf for redundancy. Each card is capable of providing the power required by a fully loaded shelf.

When two cards are available, the load is shared by the two cards. If one power supply card fails, the other power supply card takes over the full load without interruption of power.

Features

  • The card is thermally protected. In case of overloading, the Power Supply Card will stop when too high a temperature is reached and will restart once it cools off
  • The card allows for redundancy if two are connected in the shelf. If one card fails, the other takes over the full load
  • The card can be used in conjunction with the Plug-in Battery Backup Card, Model 751312, to provide an uninterruptible power supply when operating from a 24 Vdc source that may be interrupted
  • A “Power In” LED and a “Power Out” LED allow easy assessment of power supply functionality

The power supply can be housed in the 5-card Shelf (751112/1 or 751112/15), the 8-card Shelf (751109/13 or 751109/15), or in many of our High Voltage Interface (HVI) pre-configured units.

 

Recherche par mot clé

Entrez le nom ou le numéro de produit